Becker Traffic Assist Z 201 In order to update your GPS device: Becker Traffic Assist Z 201 with the latest update, follow next instructions. First of all, be sure you got the update file for your Becker Traffic Assist Z 201 device, downloaded from SpeedcamUpdates.com. If still haven't got it, you can get it now filling the form you see on this page. • Extract files from the SpeedcamUpdates zip package. If the file you have downloaded is not a ZIP file means the file is already decompressed, and you can continue with the next step of this installation instructions.

Statistical Techniques Statistical Mechanics.

• Connect your Becker Traffic Assist Z 201 device using an USB cable to your PC. Once your PC has detected your GPS device as an external storage drive open the folder './iGO8/CONTENT/speedcam'. Copy in this folder the files extracted from the zip file before. • Once the files have been copied into your Becker Traffic Assist Z 201 device, unplug USB cable and then reboot the Becker Traffic Assist Z 201 device.

• When the Becker Traffic Assist Z 201 device finishes its startup, connect it again to your PC. Open again the folder './iGO8/CONTENT/speedcam'.

Now you will see two more files, called speedcam.spdb and SpeedcamUpdates.spud respectively. Delete the file called SpeedcamUpdates.spud. Finally rename 'speedcam.spdb' as SpeedcamUpdates.spud • • Unplug your Becker Traffic Assist Z 201 device from your PC. Reboot your Becker Traffic Assist Z 201 device.

Now, go outside to get GPS coverage. Check that a new menu has been created. Go to 'Settings/Navigation settings/Danger spot' or 'Settings/Navigation settings/speedcam'. Double check that every option is adjusted to your preferences.

Installation Guide • Before starting the download you have to select your desired countries. After that push Download button and save the file SpeedcamUpdates. Geostudio Full Crack. spb to your hard disk. • Switch on your Becker device and connect it to the PC over the USB cable. It will be shown as a memory drive in your computer.

• Copy and paste the file SpeedcamUpdates.spb into directory './CONTENT/speedcam'. Delete all other files in that directory.

• Disconnect your Becker device from the computer and reboot it. • Go outside with your Becker device, switch it on and get GPS fix. • Go to menu 'Settings >Navigation settings >Danger spot' or 'Settings >Navigation settings >Speedcam'. Here you should enable audible warning and visual warning. Delete all installed speedcams with button 'Remove danger spots function'.

• Repeat all steps of that installation guide for updating speed cameras.